Water Under Dirt Minecraft (Here’s what you need to know)

Besides combat, there is a lot of fun activities that you can do in Minecraft. If you want to survive and replenish your health, you can try farming by leaning how to hydrate your farmland. If this is a relatively new concept to you, I will take you through the basics to help improve your Minecraft farming skills.

So, can you place water under dirt in Minecraft? It isn’t advisable to place water under dirt in Minecraft if you want to irrigate your land. The result will be a partially wet ground unviable for crop planting. It is advisable to have the water at the same level or a higher block than the dirt when preparing for farming. Otherwise, the earth will likely stay the same without sufficient moisture for future agriculture.

If you want to farm in Minecraft but are uncertain about the best way to water your farmland, you will need to understand where and how to place water to grow your crops and generally why you need to keep your land hydrated.

To effectively farm, you need a sufficient supply of water and a reliable method to distribute. In Minecraft, you will often see rows of water between soil, making you question whether you can have the water below the dirt.

It isn’t possible to place water under dirt when farming in Minecraft because you cannot effectively water your crops on a lower level. Therefore, it will note hydrate the ground, meaning that it will only remain as dirt.

The conventional way to irrigate your plants is to place water at the same level or above the dirt mass; this way, the water will seep to the ground and moisten the dirt. If you plan to convert the earth to fertile land, you should have the water running between the chunks; for instance, you can have a stream for two dirt rows.

Generally, you should have water near the dirt to keep it hydrated when you farm in Minecraft. Although it stays on a separate row, it still seeps into the ground and hydrates it, perfect for when you want to prepare for farming. Any farmland on Minecraft has a water structure in between dirt rows, and there may be two blocks between each stream.

Therefore, in this case, your farming area is usually reduced by a third. Thus, it is understandable if you want to increase your farm size to have the water under the dirt. Unfortunately, Minecraft doesn’t allow this; instead, the water must be at a block above or at least the same level.

Also, it is advisable to plant on it after hydrating the ground as soon as possible. Otherwise, it will only return to its original dirt state. Secondly, it also dries out when you or other characters step on it. The only way for the dirt to be viable for farming is to place your plants when still moist; otherwise, you would have to start the process again.

Can Water Be Under Crops in Minecraft?

Farming in Minecraft may be pretty similar to actual farming, but there are still some differing aspects. For instance, there is a specific way to place the water and to harvest the plants in the game. Therefore, you may wonder, can you put water at a lower level than the crops in Minecraft?

The best and only way to water plants is to be at the same level or a block higher. If you have water beneath the crops, there are high chances that the better part of your farm will not be well-hydrated.

Therefore, your plants can only grow with a sufficient water supply; or else, you may not get the result you want. It is easier to water the crops if you have water above flowing down or at the same level to seep through.

Although some gamers prefer combat in Minecraft, farming is also a necessity in survival mode. If you have a crop supply, you will have enough to sustain yourself because you will frequently make harvests, reload your health, and cater to your needs.

It is the same principle as in real life, but the virtual aspect of the game makes it pretty complex. Watering your crops in Minecraft involves blocks of water and separate ones for the plants.

The best way is to have the water block above or at the same level as your crops. If the water is lower, your plants will not get the recommended moisture level to grow, resulting in stagnation. You can tell that your soil has enough water if it has a dark, rich color than dry dirt. Also, note that unless you keep your ground hydrated, there is a risk of reverting to earth and becoming unsuitable for your crops.

Can You Place Water Under Dirt To Farm?

In Minecraft, farmland requires enough water for plants’ growth; therefore, your water sources should be strategic to irrigate the crops adequately. It explains why you have a limited distance to place your water block in this game. Read on to understand whether water under dirt can be profitable on your farm.

Water under dirt isn’t an appropriate hydration method to till the land above it and plant crops. The water below the earth may not irrigate the farmland proportionately, making it unwise to irrigate crops below the block if you want better yield.

Besides, unevenly damp dirt farmland cannot support most crops unless you like dry farming, which only works with wheat crops. Furthermore, inadequate wetness on the farm can make your land unproductive in the long run.

Gamers in Minecraft don’t use the water-under-farmland technique but deploy the most reliable design to put the water source in the middle of the block. This way, the dirt can get moisture evenly. Alternatively, the water can also be at the same ground level as the farmland or one block above the land. In this case, it will spread and hydrate about four blocks horizontally or diagonally.

Given that dirt is dry soil, it will require tons of water to rehabilitate it to its original state. Moreover, the water under your dirt block may be flowing downwards rather than seeping upwards to wet your block of land, and the block may prevent water from percolating.

Despite all the activities you may undertake on your farm, it is best to use the standard guidelines while watering it for a bounty harvest that can adequately sustain you.

Can Water Go Through Dirt in Minecraft?

Water movement on a parcel of land is necessary to wet the dirt as you prepare for farming. Since the amount of water the farm can hold influences the harvest to expect, I will discuss how water percolates through the dirt in Minecraft and how vital it is to your farming.

Water can flow through dirt in Minecraft as it would on real-life soil. Dirt farmland may lose its moisture, making it unproductive, but this land type can become rich enough to sustain you with proper hydration and farm management techniques.

To ensure that water seeps into the dirt, you can place the irrigation source about four blocks away. Notably, the water flows from its origin to the ground as long as it is either at the same level or a block higher; this way, the land will hydrate and transform into productive soil for farming.

Whether your soil turned to dirt or not, you can reverse it and till it like any other damp farmland. However, most likely, the dry soil can take more water than wet blocks. Therefore, before planting, you may need to fertilize the soil to improve your yields since transitioning dirt to viable farmland may take longer than using ready soil.

If you have any difficulty differentiating dirt from the soil in Minecraft, you will notice that an irrigated farmland is darker than dirt due to the high water content. Generally, if you want your ground to remain viable, it is advisable to water it regularly, preparing it for planting season.

You can also be wary of factors that may lead to farmland turning to dirt. For instance, it is advisable not to allow players to jump on it and frequently tend to it.

How Far Can Water Be from the Soil in Minecraft?

In Minecraft, you may spend a lot of time and effort to make your crops grow because they are your only source of sustenance. Therefore, you will need to look for the most effective way to irrigate. To avoid leaving your farmland dry, here’s what you should know.

The furthest your water can be when farming in Minecraft is four blocks away on each side. For instance, if your water source is in the middle, it will comfortably hydrate a 9×9 piece of land. If you have more crops, you may have to add more water sources because the plants on the far end may not get enough.

For best results, you can have the water at a level ground with the farm or place it a level higher but not below. It is also important to note that the hydration of a farm in Minecraft is constant regardless of the amount of water you provide.

As long as there’s a water source for a 9×9 land, you will have enough to hydrate your crops. You can even have a water block, and you won’t have to worry about it drying out. Note that you can also comfortably have four blocks horizontally, vertically, and diagonally.

Another critical point is that your plant’s hydration rate isn’t necessarily dependent on the amount of water you offer because the moisture retention is usually constant.

However, remember that the water should always be above or the same level as the farm block. Additionally, you can also design your farm such that you only have a single water source dripping down from the top to irrigate all the crops.

Besides, rainwater can also be helpful to keep the land moist alongside the water. Lastly, note that different seeds have different growth levels, but generally, the process is faster when the soil is well-hydrated.

What Is the Best Way To Water a Farm in Minecraft?

Many Minecraft gamers overlook farming, but it is one of the most fulfilling activities you can participate in the game. The best part is that it isn’t too complicated since you can quickly get the hang of it with more practice. Read on as I take you through the most effective way to water your crops to get the best out of your farm.

As soon as you find a nearby water source, right-click on your bucket to pick, then right-click again to irrigate your crops when full. Consequently, you can also dig a canal or hole where you want to plant but remember to do it as soon as possible because land tends to dry out without crops or irrigation water.

You can achieve great results when you place the water at least at the same level or above the farm since it being lower won’t fully hydrate the crops. Lastly, note that a block of water can sustain a 9×9 land horizontally and diagonally.

Crops are essential if you are in survival mode because they will keep you going by improving your health. However, it may thwart your mission if you don’t know the best way to water your plants because they will only dry out without the proper moisture level. It is advisable to ensure that there is always water on your farm for your plants to grow.

On the other hand, some plants like wheat don’t necessarily need water to survive but irrigating them improves their growth rate. Besides water, also remember that your crops will also need lighting and fertilizer.


It is critical to learn how to grow your crops and take care of them to survive in Minecraft. Therefore, you should know how to water them to help them thrive at a steady rate. It is advisable to place the water on the same block-level or higher than the crops to seep better into the soil.

If you put it under, it means that most of the farm will remain dry, unfit for planting. Luckily, with only a block of water, you can have enough to hydrate a 9×9 land. Also, your crops will additionally need lighting and fertilizer, and different plants have different growth rates.

Bal Kang

Bal Kang is a technology expert based in the UK, with experience across a number of technology areas from phones, tablets, computers to gaming.

Recent Posts